PLANET ISW-504PS - Manual (Page 51)

User’s Manual
Figure 4-28 VLAN Group – Port-Based VLAN screen
When Port-Based VLAN mode is selected, the displayed page includes the following configurable data. Description on
Table 4-10
Object Description
VLAN Type There’re three VLAN mode support – 802.1Q VLAN, Port-Bas VLAN and No
VLAN.
• 802.1Q – Packets income will be tagged with VID as the PVID setting. All ports
on the switch belong to default VLAN (VID 1).
• Port-Base - Packets can only be broadcast among other members of the same
VLAN group. Note all unselected ports are treated as belonging to the default
system VLAN.
• Disable - Forbidden ports are not included in the VLAN
If Port-based VLAN are enabled, then VLAN-tagging feature is ignored.
Management VLAN
Group
At Port-Based VLAN mode, up to 5 VLAN groups can be configured.
Member Port Select the physical interface for which you want to display or configure data.
Table 4-10 Descriptions of the Port-Based VLAN item
-51 -