PLANET ISW-504PS - Manual (Page 24)

User’s Manual
3 MANAGEMENT
This chapter describes how to manage the Industrial PoE Switch Topics include:
- Overview
- Management method
- Logging on to the Industrial PoE Switch
3.1 Overview
The Industrial PoE Switch provides a user-friendly, Web interface. Using this interface, you can perform various device
configuration and management activities, including:
„ System
„ Power over Ethernet
„ Tools
3.2 Requirements
„ Network cables. Use standard network (UTP) cables with RJ-45 connectors.
„ Subscriber PC installed with Ethernet NIC (Network Card)
„ The operate system of subscriber PC that running Windows XP/2003, Vista, Windows 7, MAC OS X , Linux,
Fedora, Ubuntu or other platform compatible with TCP/IP protocols.
It is recommended to use Internet Explore 7.0 or above to access Industrial PoE Switch.
3.3 Management Method
User can manage the Industrial PoE Switch by Web Management via a network connection.
3.3.1 Web Management
The Industrial PoE Switch can be configured through an Ethernet connection, make sure the manager PC must be set on
same the IP subnet address with the Industrial PoE Switch.
For example, if you have changed the default IP address of the Device to 192.168.99.123 with subnet mask 255.255.255.0
via console, then the manager PC should be set at 192.168.99.x (where x is a number between 2 and 254) with subnet
mask 255.255.255.0. Or you can use the factory default IP address 192.168.0.100 to do the relative configuration on
manager PC.
-24 -