PLANET ISW-504PS - Manual (Page 29)

User’s Manual
4. WEB CONFIGURATION
The Industrial PoE Switch provides Web interface for PoE smart function configuration and make the Industrial PoE Switch
operate more effectively - They can configure through the Web Browser and the network administrator can manage and
monitor the Industrial PoE Switch from the local LAN. This section indicates how to configure the Industrial PoE Switch to
enable its smart function.
4.1 Main Menu
After a successful login, the main screen appears. The main screen displays the product name, the function menu, and the
main information in the center. As shown in
Figure 4-1 and description on Table 4-1.
Figure 4-1 Main Menu Screen
„ System:
Provide System information and configuration of Switch. Explained in section 4.3 .
„ Port Management Setup Per Port mode, Rate Limit, Port description.
Explained in section 4.4 .
„ VLAN
Configure VLAN Member / Port Configuration. Explained in section 4.5 .
„ Quality of Service Mapping the packet level to classify the packets priority.
Explained in section 4.6 .
„ Storm Control Enable Storm Control function to reduce broadcast packets on the Switch.
Explained in section 4.7 .
„ Misc Configuration Configure MAC address table aging, aging time mode and port flow control.
Explained
-29 -