PLANET ISW-504PS - Manual (Page 8)

User’s Manual
The smart functions make it easy to survey and control the PoE power provision to the devices by the Web interface. Basic
switching functions such as VLAN, bandwidth control and QoS are available for network management.
With Fast Ethernet SFP interface, the ISW-514PSF is with high reliability and flexibility to extend the distance from 2km to
20Km. It depends on the MFB family Fast Ethernet SFP modules.
1.3 Features
¾ Interfaces
Ports Fiber Optical Interface
Model Name
Copper Optical Mode Connector Distance
ISW-504PS 5 x 10/100Base-TX NA NA NA NA
ISW-514PS Multi-Mode SC 2km
ISW-514PS15 Single-Mode SC 15km
ISW-514PSF
4 x 10/100Base-TX 1 x 100Base-FX
Optional SFP
Module
LC
Depend on
SFP
Module
4-Port support 48V DC power to PoE Powered Device
¾ PoE
„ Comply with IEEE 802.3af Power over Ethernet End-Span PSE
„ Up to 4 IEEE 802.3af devices powered
„ Support PoE Power up to 15.4 Watts for each PoE ports
„ Auto detect powered device (PD)
„ Circuit protection prevent power interference between ports
„ Remote power feeding up to 100m
¾ PoE Management
„ Total PoE power budget control
„ Enable / Disable PoE function on each port
„ PoE port Power feeding priority
„ Power limit on PoE port
„ PD classification detection
¾ Web Management
„ Web interface for remote management
„ Firmware upgrade through Web interface
„ SNMP Trap for alarm notification of events
„ VLAN and QoS configuration
„ PLANET Smart Discovery utility automatically finds PLANTE devices on the network
¾ Switching
„ Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX / 100Base-FX Ethernet standard
„ Supports Auto-Negotiation and 10/100Mbps Half / Full Duplex and Auto MDI / MDI-X
-8 -