PLANET WDRT-730 - Manual (Page 17)

User Manual of WDRT-730
-10-
2.1.3 The Rear Panel
The rear panel provides the physical connectors connected to the power adapter and any other
network devices. Figure 2-3 shows the rear panel of WDRT-730.
Rear Panel
Figure 2-3 Rear Panel
Interface Function
Antenna x 2 Fixed Dual-Band 3dBi Omni Dipole Antennas.
Radio ON/OFF Switch the button to activate or deactivate the wireless function.
Reset the WDRT-730 to the factory default (clear all settings) or activate
WPS function.
Reset/WPS
Press for more than 10 seconds to reset the device to factory default.
Press for less than 5 seconds once to activate 2.4GHz wireless WPS
function.
Press for
less than 5 seconds twice to activate 5GHz wireless WPS
function.
WAN Connect to the Cable/xDSL Modem, or the Ethernet
LAN1-4 Connect to the user’s PC or network devices
Power Connect to the power adapter provided in the package
Table 2-2 The Interface indication