Pppoe – PLANET WDRT-730 User Manual
Page 35
User Manual of WDRT-730
-28-
Object
Description
IP Address
Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask
Enter the subnet Mask in dotted-decimal notation provided by your
ISP, usually is 255.255.255.0
Default Gateway
(Optional) Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
TTL
Choose the number of TTL if the local ISP requires you to do so.
Table 5-4
5.2.2.3.
PPPoE
If your local ISP provides a PPPoE connection, choose PPPoE and fill the necessary parameters
below. (
):
Figure 5-11 WAN – PPPoE
Object
Description
User Name / Password
Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Service Name
(Optional)
Please give a name to this Internet service.
MTU
Please input the MTU value of your network connection here. If you
don’t know, please keep the default value.
Connect Type
You can select Continuous to keep the connection be always on. Or
select Connect on Demand, then you can configure Idle Time Out