PLANET WDRT-730 - Manual (Page 58)

User Manual of WDRT-730
-51-
Figure 5-30
Object Description
Key Length There are two types of WEP key length: 64-bit and 128-bit. Using
128-bit is safer than 64-bit but will reduce some data transfer
performance.
Key Format There are two types of key format: ASCII and Hex. When you select a
key format, the number limit of characters for key will be displayed.
Default Tx Key You can set up to four sets of WEP key, and you can decide which key
is being used by default here. If you don’t know which one you
should use, select Key 1.
Encryption Key 1-4 Input Encryption Key characters here, the number of the
characters must be the same as the number displayed at ‘Key
Format’ field. You can use any alphanumerical characters (0-9, a-z,
and A-Z) if you select ‘ASCII’ key format. And if you select ‘Hex’ as key
format, you can use characters 0-9, a-f, and A-F. You must enter at
least one encryption key here, and if you entered multiple WEP keys,
they should not be the same with each other.
Table 5-22