PLANET WNAP-6308 - Manual (Page 15)

User Manual of WNAP-6308
-5-
1.3 Product Features
 Industrial Compliant Wireless LAN & LAN
 Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate
 Backward compatible with 802.11b/g standard
 Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported
 Fixed-network Broadband Router
 Supported connection types: Dynamic IP/ Static IP/ PPPoE/ PPTP/ L2TP / IPSec
 Supports Virtual Server, DMZ for various networking applications
 Supports DHCP Server, UPnP, Dynamic DNS
 RF Interface Characteristics
 Built-in N-Type Male Antenna Connector
 High Output Power Up to 200mW with multiple adjustable transmit power control
 Outdoor Environmental Characteristics
 IP55 Enclosure, UV resistance
 Passive Power Over Ethernet Design
 Operating Temperature: -35~65 degrees C
 Multiple Operation & Wireless Mode
 Multiple Operation Modes: Bridge, Gateway, WISP
 Multiple Wireless Modes: AP, Client CPE(WISP), WDS PtP, WDS PtMP, Repeater
 Supports Dual-SSID to allow users to access different networks through a single AP
 Supports WMM (Wi-Fi Multimedia)
 Secure Network Connection
 Supports Software Wi-Fi Protected Setup (WPS)
 Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES), and 802.1x
Authentication
 Supports NAT firewall features, with SPI function to protect against DoS attacks.
 Supports IP / Protocol-based access control and MAC Filtering
 Easy Installation & Management
 Web-based UI and Quick Setup Wizard for easy configuration
 Remote Management allows configuration from a remote site
 SNMP-based management interface
 System status monitoring includes DHCP Client, System Log