PLANET WNAP-6308 - Manual (Page 24)

User Manual of WNAP-6308
-14-
Step 3. Take out the power cord and PoE injector. Plug the power cord into the DC port and plug the other
side of the RJ-45 cable like Step 2 into the POE port of the PoE injector.
Figure 3-3 Connect the PoE injector
Step 4. Pole Mounting:
Place the straps through the slots on the sides of the WNAP-6308 and then around the pole. Tighten the straps
to secure the WNAP-6308.
Figure 3-4 Pole Mounting
Ethernet Cable
Ethernet Cable
PC Switch
24V PoE Injector
Data + Power
Power
Data
PoE Port
802.11 b/g/n A
cc
ess P
oin
t
LAN
PWR
WNAP-6308
3
24V PoE Injector
Data In
PoE
PoE Out
1
2