PLANET WNAP-6308 - Manual (Page 85)

User Manual of WNAP-6308
-75-
 SSID It is the wireless network name of Root AP.
 BSSID (optional) Indicate the Basic Service Set ID of the associated AP
 Encryption Settings Select the encryption type that you would like to use.
 Distance
To decrease the chances of data retransmission at long distance, the
IEEE 802.11b/g/n Wireless Outdoor CPE can automatically adjust
proper ACK timeout value by specifying distance of the two nodes.
 ACK/CTS Timeout
ACK/CTS Timeout settings are for long distance links. It is important
to tweak settings to achieve the optimal result based on requirement.
The device’s default settings should be sufficient for most
applications.
The value is auto determined by distance between the radios, data
rate of average environment.
 RTS/CTS
RTS/CTS (Request to Send / Clear to Send) is the optional
mechanism used by the 802.11 wireless networking protocol to
reduce frame collisions introduced by the hidden node problem.
You can enter a setting ranging from 0 to 2347 bytes.
 Fragmentation
Threshold
The fragmentation threshold determines the size at which packets
are fragmented (sent as several pieces instead of as one block). Use
a low setting in areas where communication is poor or where there is
a great deal of radio interference. This function will help you to
improve the network performance.
 WDS Client Check it to enable WDS Client function.