3 installing the ap, Installing the ap, Igure – PLANET WNAP-6308 User Manual
Page 23: Onnect the, Ntenna, Thernet cable
Advertising
User Manual of WNAP-6308
-13-
3.3 Installing the AP
Please install the AP according to the following steps. Don't forget to pull out the power plug and keep your
hands dry.
Step 1. Connect the Antenna to the top of the WNAP-6308.
Figure 3-1 Connect the Antenna
Step 2. (1) Open the bottom of the WNAP-6308.
(2) Plug the RJ-45 Ethernet cable into the LAN port through the Cap and Gasket. Then seal the
bottom of the WNAP-6308 with the Cap and Gasket.
Figure 3-2 Connect the Ethernet cable
Advertising