PLANET WNAP-6308 - Manual (Page 58)

User Manual of WNAP-6308
-48-
5.4.4 Firewall
Figure 5-46 NAT Option
The page includes the following fields:
Object Description
 Remote Management
(via WAN)
Select Deny or Allow for remote management function.
 Remote Management
Port
Configure the port for remote management.
 Ping from WAN Filter Select Deny or Allow for Ping permit from WAN.
 SPI Firewall Select Disable or Enable for SPI firewall function.
 Network Address
Translation
Enable it to let the LAN devices connect to the Internet.
All computers must be assigned with a public IP address to get
connected to the Internet without NAT. However, Internet Service
Providers only provide very few IP addresses to every user.
Therefore it is necessary to use NAT to share a single public IP
address to multiple computers on local network, so everyone can get