PLANET WNAP-6308 - Manual (Page 17)

User Manual of WNAP-6308
-7-
 IPSec
Operating Mode
 Bridge
 Gateway
 WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ Firewall
Built-in firewall with Port / IP address / MAC / URL filtering
Wireless Mode
 AP
 Client
 WDS PTP
 WDS PTMP
 WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation
Enables isolation of each connected wireless client from communicating with
each other mutually.
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Wireless Security
Enable / Disable SSID Broadcast
Multiple SSID Up to 2
Max. Wireless Client 20
Max. WDS AP 8
Max. Wired Client 30
WMM Supports Wi-Fi Multimedia
QoS Supports Quality of Service for bandwidth control
NTP Network Time Management
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic tool System Log, Ping Watchdog
Mechanical & Power
IP Rate IP55
Material Outdoor UV Stabilized Enclosure
Dimensions (Φ x H) 45 x 169 mm
Weight 128kg
Installation Pole mounting
Power Requirements
LAN 12~24V DC, Passive PoE
Pin 4,5 VDC+
Pin 7,8 VDC-
Power Consumption 1.5W
Environment & Certification
Operation Temperature -35 ~ 65 degrees C
Operating Humidity 5 ~ 90% non-condensing