PLANET WNAP-6308 - Manual (Page 80)

User Manual of WNAP-6308
-70-
5.6.1.3. Wireless Mode – WDS Repeater
Figure 5-65 Wireless Mode – WDS Repeater
The page includes the following fields:
Object Description
 Wireless Mode
Click to select Wireless Mode from pull down menu.
There are 4 options available:
Access Point:
This mode allows wireless clients or Stations(STA) to access
WDS Access Point:
This mode enables the wireless interconnection of Access Point in an
IEEE802.11 network .and accept wireless clients at the same time.
WDS Repeater:
Set to this mode to enable the wireless access point repeat the signal
of root access point using WDS.
WDS Client:
Set to this mode to enable wireless client using WDS to connect to
the WDS Access Point.
 Root AP MAC Address
(optional)
Fill out the Root AP’s MAC Address enable it to connect to the Root
AP using WDS.
 Country Code Set your country code by clicking the “Set Country Code”.