PLANET DVR-1672 - Manual (Page 33)

27
Item Description
Motion Detection
Check the box to Enable/ Disable Motion Detection for
all channels.
Motion Popup
Check the box to Enable/ Disable popup screen
function for all channels. When motion is detected in
LIVE mode, the detected channel image will popup in
full screen display.
1 2 3 4 You can setup independently for each channel.
Selected Channel
Turn Check the box to Enable/ Disable motion detection for
each channel.
Object Size
Drag the white bar or press to set up Object Size
from value 1 to 15 for each channel. The lower value
you set the higher sensitivity it will be.
Sensitivity
Drag the white bar or press to set up Sensitivity
from value 1 to 15 for each channel. The lower value
you set the higher sensitivity it will be
Motion Area Setup Enter to setup motion detection area
5.3.1.1 Motion Area Setup
There are 16x12 partitions in motion detection area. Under initializing status,
motion detection area is in the entire screen. Red colored area is detected; yet
the undetected area is transparent. It is purple while network is connected.