ProSoft Technology MVI69-103M - Manual (Page 34)

MVI69-103M ♦ CompactLogix or MicroLogix Platform Configuring the MVI69-103M Module
IEC 60870-5-103 Master Communication Module
Page 34 of 131 ProSoft Technology, Inc.
November 3, 2008
2.8.4 Transferring the Configuration File to the Module
Perform the following steps to transfer a configuration file from your PC to the
module.
1 Connect your PC to the Configuration/Debug port of the module using a
terminal program such as HyperTerminal. Press [?] to display the main
menu.
2 Press [R] (Receive Module Configuration). The message "Press Y key to
confirm configuration receive!" is displayed at the bottom of the screen.
3 Press [Y]. The screen now indicates that the PC is ready to send.