ProSoft Technology MVI69-103M - Manual (Page 69)

Diagnostics and Troubleshooting MVI69-103M ♦ CompactLogix or MicroLogix Platform
IEC 60870-5-103 Master Communication Module
ProSoft Technology, Inc. Page 69 of 131
November 3, 2008
Listing ASDU point counts
Press [5] to display the ASDU point counts for each ASDU type.
Returning to the Main Menu
Press [M] to return to the Main Menu.
4.2 LED Status Indicators
The LEDs indicate the module's operating status as follows:
Module Color Status Indication
On Data is being transferred between the module and a remote
terminal using the Configuration/Debug port. CFG Green
Off No data is being transferred on the Configuration/Debug port.
On Data being transferred on the first application port P1 Green
Off No data being transferred on port
On Data being transferred on the second application port P2 Green
Off No data being transferred on port
Off The MVI69-103M is working normally. APP
Status
Amber
On The MVI69-103M module program has recognized a
communication error.
On The LED is on when the module is performing a write
operation on the backplane. BP ACT Amber
Off The LED is off when the module is performing a read
operation on the backplane. Under normal operation, the LED
should blink rapidly on and off.
Off The card is not receiving any power and is not securely
plugged into the rack.
Green The module is operating normally.
OK Red/
Green
Red The program has detected an error or is being configured. If
the LED remains red for over 10 seconds, the program has
probably halted. Remove the card from the rack and re-insert
the card to restart the module's program.
Off The battery voltage is OK and functioning. BAT Red
On The battery voltage is low or battery is not present. Allow
battery to charge by keeping module plugged into rack for 24
hours. If BAT LED still does not go off, contact ProSoft
Technology, as this is not a user serviceable item.