ProSoft Technology MVI56-DFCM - Manual (Page 13)

MVI56-DFCM ♦ ControlLogix Platform Start Here
DF1 Half/Full Duplex Master/Slave Serial Communication Module User Manual
ProSoft Technology, Inc. Page 13 of 106
September 24, 2014
3 With a firm but steady push, snap the module into place.
4 Check that the holding clips on the top and bottom of the module are securely
in the locking holes of the rack.
5 Make a note of the slot location. You must identify the slot in which the
module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the
ControlLogix rack.
6 Turn power ON.
Note: If you insert the module improperly, the system may stop working, or may behave
unpredictably.