ProSoft Technology MVI56-DFCM - Manual (Page 70)

Reference MVI56-DFCM ♦ ControlLogix Platform
User Manual DF1 Half/Full Duplex Master/Slave Serial Communication Module
Page 70 of 106 ProSoft Technology, Inc.
September 24, 2014
5.1.2 Hardware Specifications
Specification Description
Backplane Current Load 800 mA @ 5 VDC
3 mA @ 24 VDC
Operating Temperature 0°C to 60°C (32°F to 140°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Shock 30 g operational
50 g non-operational
Vibration: 5 g from 10 to 150 Hz
Relative Humidity 5% to 95% (without condensation)
LED Indicators Module Status
Backplane Transfer Status
Application Status
Serial Activity
Debug/Configuration port (CFG)
CFG Port (CFG) RJ45 (DB-9M with supplied cable)
RS-232 only
Application ports (PRT1 & PRT2)
Full hardware handshaking control, providing radio, modem and multi-drop support
Software configurable
communication parameters Baud rate: 110 to 115,200 baud, depending on
protocol
RS-232, 485 and 422
Parity: none, odd or even
Data bits: 5, 6, 7, or 8
Stop bits: 1 or 2
RTS on/off delay: 0 to 65535 milliseconds
App Ports (P1, P2) (Serial
modules) RJ45 (DB-9M with supplied cable)
RS-232 handshaking configurable
500V Optical isolation from backplane
Shipped with Unit RJ45 to DB-9M cables for each port
6-foot RS-232 configuration cable
5.1.3 Functional Specifications
DF1 ports
 Full and half duplex modes supported
 CRC and BCC error checking
 Full hardware handshaking control provides radio, modem and multi-drop
support
 User-definable module memory usage, supporting the storage and transfer of
up to 5000 registers to/from the control processor
 Up to 125 word read and write command lengths supported
 Floating point data movement supported