ProSoft Technology MVI56-DFCM - Manual (Page 27)

MVI56-DFCM ♦ ControlLogix Platform Using the RSLogix 5000 v16 Add-On Instruction
DF1 Half/Full Duplex Master/Slave Serial Communication Module User Manual
ProSoft Technology, Inc. Page 27 of 106
September 24, 2014
Select the R EQUESTED P ACKET I NTERVA l value for scanning the I/O on the
module. This value represents the minimum frequency at which the module
will handle scheduled events. This value should not be set to less than 1
millisecond. The default value is 5 milliseconds. Values between 1 and 10
milliseconds should work with most applications.
6 Save the module
Click OK to close the dialog box. Notice that the module now appears in the
C ONTROLLER O RGANIZATION window.