ProSoft Technology MVI56-DFCM - Manual (Page 46)

Ladder Logic MVI56-DFCM ♦ ControlLogix Platform
User Manual DF1 Half/Full Duplex Master/Slave Serial Communication Module
Page 46 of 106 ProSoft Technology, Inc.
September 24, 2014
This action opens the Select Module dialog box:
2 Select the 1756-M ODULE (G ENERIC 1756 M ODULE ) from the list and click OK.
This action opens the New Module dialog box.
3 Enter the Name, Description and Slot options for your application. You must
select the Comm Format as D ATA - INT in the dialog box, otherwise the
module will not communicate. Click OK to continue.
Parameter Value
Name Enter a module identification string. Example: DFCM_2
Description Enter a description for the module. Example: DF1
H ALF /F ULL D UPLEX M ASTER /S LAVE S ERIAL C OMMUNICATION
M ODULE
Comm Format Select D ATA -INT.
Slot Enter the slot number in the rack where the MVI56-DFCM
module is located.
Input Assembly Instance 1
Input Size 250
Output Assembly Instance 2
Output Size 248
Configuration Assembly Instance 4
Configuration Size 0