ProSoft Technology MVI56-DFCM User Manual
Page 35
Advertising
MVI56-DFCM ♦ ControlLogix Platform
Using the RSLogix 5000 v16 Add-On Instruction
DF1 Half/Full Duplex Master/Slave Serial Communication Module
User Manual
ProSoft Technology, Inc.
Page 35 of 106
September 24, 2014
11 Change the default tags DFCM
and AOI56DFCM
to avoid conflict with
existing tags. In this step, you should append a string to the default tag
names, such as "_2", as shown in the following illustration.
12 Click OK
to confirm.
The setup procedure is now complete. Save the project and download the
application to your ControlLogix processor.
Advertising