ProSoft Technology 5104-DNPS-PDPM - Manual (Page 33)

PDPM ♦ ProLinx Gateway Configuration
PROFIBUS DP Master Protocol Manual
ProSoft Technology, Inc. Page 33 of 70
June 24, 2013
After the download procedure, the device executes an internal restart and begins
with the communication if the start condition in DP Master Settings has been set
to Automatic release of the communication by the device.
3.1.15 Online Functions
Starting Debug Mode
Choose Online, then Start Debug Mode from the menu. The system configurator
cyclically interrogates the status of the network communication on the master
and individual condition of the devices. To end Debug Mode, select Online, then
Debug Mode from the menu.
The Debug Window
When the debug session is started, the Configuration Window changes to the
Debug window. The devices and the line between them are displayed in green or
red color depending on the established network communication.
When the debugger starts, PROLINX SyCon requests the status of all devices
from the master. If there is an error on a device, the bus line to this device is
drawn in red otherwise it is green.
PROLINX SyCon also displays the letters Diag if the device signals diagnostic
information. This information is displayed closer if you click with the mouse onto
the corresponding device in debug mode.