Sony Multi Interface Shoe Adapter - Manual (Page 1081)

1081
Error Messages
Ap
pen
dix
(
V
olu
m
e
3)
Restore No external HDD was found
(–2). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the external hard disk
could not be recognized. Check that the
external hard disk is correctly connected.
Cannot access the partition
(–12). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the logical drives of the
external hard disk could not be accessed.
Check that the external hard disk is correctly
formatted.
Cannot access the directory
(–20). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the directory of the
external hard disk could not be accessed.
Cannot access the directory
(–21).
The external HDD is busy
(–22). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the external hard disk
was busy and could not be accessed. Try again
after you check that the access lamp of the hard
disk or the indicator of the menu is turned off.
No file was found (–40). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the file to be written into
the external hard disk was not found.
Restore operation failed (–42). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore] but the recalling file from the
external hard disk was not completed correctly.
Restore operation failed (–43).
Restore Cannot restore the other signal
format file (–44). 2562: Frame Memory >External HDD >Backup/
Restore
In the above menu, an attempt was made to
execute [Restore], but a frame clip file with
ancillary data recorded in the different format
from that of the system is included in the
selected files.
Set Time/
Date Error: Wrong Format. 7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
Warning No Switcher information
available.
Please confirm “Network
Configuration” on Page 7311. When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311:Engineering Setup >System
>Network Config menu, retry [Auto Config].
Icon Title Message Description