Sony Multi Interface Shoe Adapter - Manual (Page 909)

909
Cross-Point Settings (Xpt Assign Menu)
Chap
te
r 1
9
Cont
ro
l P
a
n
e
l
Set
u
p
(
P
a
nel)
3
Press [Table Assign Set].
This sets the table for the selected switcher bank or bus.
Exporting Source Names and Destination Names
To send the source names and destination names to the S-Bus, use the
following procedure.
1
In the Panel >XPT Assign menu, press [Name Export].
The Name Export menu appears.
2
Turn the knob to set the station ID.
a) If set to 255, the information is sent to all stations (with display of “All”).
3
Press [Src Name Export].
This exports the source names to the station selected in step 2 .
4
Press [Dest Name Export].
This exports the destination names to the station selected in step 2 .
Note
Since destination names cannot be selected freely, fixed names are used.
Knob Parameter Adjustment Values
3 Table No Selection of table
to be assigned 1 to 15
Knob Parameter Adjustment Setting values
1 Station ID Station ID setting
1 to 255
a)