Sony Multi Interface Shoe Adapter - Manual (Page 561)

561
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
• HD format
a) – 1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the
clockwise direction.
Note
There is no Radius setting when Line is selected in the <Spot Mode>
group.
To rotate the ring
1
Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring] was selected changes.
2
Set the following parameter.
a) – 100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
To invert the lighted area
Press [Light Invert], turning it on.
The lighted area is inverted.
To add color to the light source
1
In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
2
In the <Fill Blending Mode> group, select how the light and image should
be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
3
If you selected Mix, select the fill color in the <Fill Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually varies.
Knob Parameter Adjustment Setting values
1 Offset Offset from center position (radius) –24.00 to +24.00
2 Radius Radius of ring 0.00 to 6.00
3 Angle Rotation angle of ring
–8.00 to +8.00
a)
Knob Parameter Adjustment Setting values
3 Speed Rotation speed and direction
–100.00 to +100.00
a)