Dexibell CLASSICO L3 76-Organ - Manual (Page 27)

27
Adding Tremulant Effect
/
VALUE/REV TYPE
OBOE TRUMPET
FLUTE VIOLIN
REVERB PLAYER
The tilt tab will light, and the tremulant effect will be applied to the sound.
2.
To turn it off, press the upper part of the [TREMULANT]
tilt tab.
Choosing the Tremulant Type
The CLASSICO L3 is equipped with 3 types of tremulant effect.
1.
Press and hold the lower part of the [TREMULANT] tilt tab
until its indicator flashes.
2.
Press the [1], [2] or [3] Memory piston to choose your
favorite tremulant effect.
PHONES AUDIO IN
3.
Press the lower part of the [TREMULANT] tilt tab to leave
the editing function
Assigning the Tremulant Effect to a Tilt Tab
1.
Press and hold the lower part of the [TREMULANT] tilt tab
until its indicator flashes.
2.
Select the tilt tabs to which you want to assign the
tremulant effect. You can select tilt tabs in the MANUAL I,
MANUAL II and PEDAL division.
3.
Press the lower part of the [TREMULANT] tilt tab to leave
the editing function.
NOTE
See p. 33 to save your settings. If you don’t save them, your
changes are lost when you switch off the CLASSICO L3.