Dexibell CLASSICO L3 76-Organ - Manual (Page 30)

30
Useful Functions
PIANO HARPSICHORD
TUNING TEMPERAMENT TRANSPOSE
In the example above we select a register in the MANUAL I division.
The tilt tab flashes to indicate that we are in edit mode.
2.
Turn the [TONE/LEVEL] knob to adjust the volume of the
register you selected.
/
VALUE/REV TYPE
OBOE TRUMPET
FLUTE VIOLIN
REVERB PLAYER
Turning the knob clockwise will increase the volume, and turning it
counterclockwise will decrease the volume.
The [VALUE/REV TYPE] LED meter shows the value.
3.
If you want, you can press another tilt tab to adjust its
volume.
4.
Press the tilt tab you selected again to leave edit mode.
NOTE
See "Working with Memory Pistons" (p. 33) to save your
settings. If you don’t save them, your changes are lost when you
switch off the CLASSICO L3.
How to Adjust the Volume of each
Section
You can adjust the volume for the Orchestral sections (MANUAL I, MANUAL II and
PEDAL) and the volume of the Piano and Harpsichord sections of the MANUAL II.
1.
Press and hold one of the button of the section you want
to adjust until it's indicator flashes.
/
VALUE/REV TYPE
OBOE TRUMPET
FLUTE VIOLIN
REVERB PLAYER
BASS
ORCHESTRA
ORGAN
PIANO HARPSICHORD
TUNING TEMPERAMENT TRANSPOSE
PIANO HARPSICHORD
TUNING TEMPERAMENT TRANSPOSE
Piano & Harpsichord
sections
MANUAL I Orchestral sections
PEDAL
Orchestral sections
MANUAL II
Orchestral sections
MANUAL I
You are now in edit mode.
2.
Turn the [TONE/LEVEL] knob to adjust the volume.
/
VALUE/REV TYPE
OBOE TRUMPET
FLUTE VIOLIN
REVERB PLAYER
Turning the knob clockwise will increase the volume, and turning it
counterclockwise will decrease the volume.
The [VALUE/REV TYPE] LED meter shows the value.
3.
If you want, you can press the button of other sections to
adjust its volume.
4.
Press the button of the section again to leave edit mode.
NOTE
See "Working with Memory Pistons" (p. 33) to save your
settings. If you don’t save them, your changes are lost when you
switch off the CLASSICO L3.
Shifting the Tuning of the Orchestral
Sections in Octave Steps
The Octave function is an useful parameter that allows you to change the
pitch of the selected part in octave steps (12 semitones at a time).
You can adjust the octave separately for each orchestral section (MANUAL
I, MANUAL II and PEDAL) and the octave of the Piano and Harpsichord sections of
the MANUAL I.