KORG SP-280 Portable Digital Piano (Black) - Manual (Page 12)

12
Playing two sounds at the same time (Layer mode)
You can play two sounds at the same time on the keyboard. This is called the
Layer mode.
Simultaneously press the two sound buttons for the sounds to be played at the
same time. The LEDs for the two pressed sound buttons will light up.
The leftmost or uppermost selected sound button is layer 1, and the other (right-
most or lowermost) one is layer 2 (see the diagram at the right).
For example, if E.PIANO1 and ORGAN1 are selected, E.PIANO1 is layer 1 and
ORGAN1 is layer 2.
In order to use sounds in different banks, first select the banks in the Single
mode for the sound buttons to be pressed.
For example, to play by layering the grand piano and jazz organ 2 sounds, select
bank 1 (grand piano) for the PIANO1 button and bank 2 (jazz organ 2) for the
ORGAN1 button, and then press both buttons simultaneously.
When selecting Layer mode, the total number of voices that can play at the
same time is reduced, depending on the total number of oscillators used by
the selected sounds. (refer to “About maximum polyphony” on page 22.)
Sounds in different banks for the same sound button (grand piano and
bright piano for the PIANO1 button) cannot be selected.
Returning to the Single mode
To return to Single mode, just press a single sound selection button.
Layer mode settings
In Layer mode, the volume balance between sounds can be adjusted, the oc-
tave for each sound can be shifted, and the damper pedal can be enabled or
disabled for each sound. (refer to “Function mode” on page 17.)
Performing with another person (Partner mode)
Two people can play in the same range with the keyboard divided in half be-
tween them. This is called the Partner mode.
1. Press the FUNCTION button.
The FUNCTION and PIANO1 LEDs will light up.
2. Press the E.PIANO1 button.
The LED for the E.PIANO1 sound button lights up, and oFF appears in the
display.
3. Press the UP button beside the display to select on.
Partner mode is turned on, and the PIANO1 sound is used for both the left
and right sides of the keyboard.
Layer 2
Layer 1
2 1,5
3
4
Partner mode