KORG SP-280 Portable Digital Piano (Black) - Manual (Page 14)

14
Effects
Brilliance
This effect changes the brightness of the tone.
The setting can be changed by holding down the BRILLIANCE button and
pressing the UP or DOWN button beside the display.
The setting appears in the display with 3 producing a brighter sound and 1 pro-
ducing a less bright sound.
The same setting is applied to all sounds and remains applied until the SP-280
is turned off. When the instrument is turned on, the default setting 2 is selected.
Brilliance cannot be turned off.
Reverb
This effect adds ambience and depth to the sound, producing the sense of per-
forming in a concert hall. As a factory default, the on/off setting for this effect as
well as this effect’s setting are saved with each sound.
Each press of the REVERB button turns reverb on (LED lights up) or off (LED
turns off).
To change this setting, hold down the REVERB button and press the UP or
DOWN button beside the display.
The setting appears in the display with 3 producing a deep reverb effect and 1
producing a light reverb effect.
If a different sound is selected or if the SP-280 is turned off, the on/off setting for
this effect as well as this effect’s setting return to their factory defaults (default
settings).
Chorus
Chorus adds modulation to the sound, producing an expansively rich sound.
As a factory default, the on/off setting for this effect as well as this effect’s set-
ting are saved with each sound.
Each press of the CHORUS button turns reverb on (LED lights up) or off (LED
turns off).
To change this setting, hold down the CHORUS button and press the UP or
DOWN button beside the display.
The setting appears in the display with 3 producing a deep chorus effect and 1
producing a light chorus effect.
If a different sound is selected or if the SP-280 is turned off, the on/off setting for
this effect as well as this effect’s setting return to their factory defaults (default
settings).