HP 24SII - Manual (Page 101)

&
 
 
 
  
OPTION ACCESSIBILITY: Through Port 1 of Module 1 only.
By responding to the Enter Request: message at the end of the main
configuration menu (see
Section 8.1 ) with capital "B" for any serial
module or capital "A" for the M24SII-V02 high speed parallel module
(Select Print Schedule for I.D. Page), you may schedule the I.D. Page
Message to print before or after a print job. This scheduling is done at
the printer port.
For example, if you have Port 3 and Port 4 designated as printer
ports, the Model 24SII DES will respond with:
Enter Request :B
-----------------------------------
| Port | Logical Name |I.D. Page|
| | (Printer) |Schedule |
-----------------------------------
| 3 |Device A | Before |
| 4 |Device B | Before |
-----------------------------------
Enter Port Number (ENTER=Exit) :
Enter the number of the printer port for which you wish to change the
I.D. Page Message print schedule and then strike the Enter key. For
example, if you entered "3" and Enter for Port 3, the Model 24SII DES
will respond with:
I.D. Page is to be Print ( BEFORE ) the Print Job
Enter A for After, B for Before, ENTER for no change :
Enter "A" if you wish the I.D. Page Message to print after the print job,
or "B" if you wish the I.D. Page Message to print before the print job.
You can also strike the Enter key for no change. For example, if you
entered "A", the Model 24SII DES will respond with:
I.D. Page is to be Print ( AFTER ) the Print Job
Enter A for After, B for Before, ENTER for no change :