HP 24SII - Manual (Page 86)


& 
 
 
'  "#
   (
NOTE: This section pertains only to the M24SII-V02 high speed
parallel module.
OPTION ACCESSIBILITY: Through Port 1 of Module 1 only.
By responding to the Enter Request: message at the end of the main
configuration menu for the M24SII-V02 high speed parallel module
(see
Section 8.1 ) with "3" (Set Number of Printers), you may set the
Number of Printers you wish to have on the selected high speed
parallel module.
The Model 24SII DES will respond with:
Number of Printers is....................0
Enter Number of Printers (1 to 4)........:
Enter the desired Number of Printers.
NOTE: The higher numbered ports on the M24SII-V02 high speed
parallel module are reserved as printer ports. For example, if you
wish to define 2 printers on this module, enter "2" in response to the
prompt above. Physically connect the printers to Port 3 and Port 4 of
this module number.
The Model 24SII DES will return to the main configuration menu for
the M24SII-V02 high speed parallel module (see
Section 8.1 ) and
display the following message:
Change your devices to match new configuration
This reminds you to connect the proper device to a newly configured
computer or printer port. Computers and modems connect to
computer ports. Printers and plotters connect to printer ports.