HP 24SII - Manual (Page 79)


NOTE: If you happen to be configuring a M24SII-V02 high speed
parallel module, the main configuration menu is different from the one
shown on the previous page.
The Model 24SII DES will respond to the receiving of Control-T ,
capital C, and the M24SII-V02 module number with the following
menu:
Copyright (c) Bay Technical Associates, 1992
Model 24SII Data Exchange System Rev. 2.02
Total memory 1M
This Module is 1
Status.......................................1
Program Port Logical Name....................2
Set Number of Printers.......................3
Program Port Select Code.....................4
Set Port Select Mode.........................5
Set Input Inactivity Timeout.................6
Enable/Disable Form Feed Mode................7
Program I.D. Page Message....................8
Enable/Disable I.D. Page Message.............9
Select Print Schedule for I.D. Page..........A
Program Default Printer Assignment...........B
Exit Configuration...........................X
We will make special notes at the beginning of certain configuration
subsections if that subsection does not apply to the M24SII-V02 high
speed parallel module or if that subsection pertains exclusively to this
module.