HP 24SII - Manual (Page 17)


Printer Sharing Mode (high speed serial modules only):
(per module) Unidirectional or bidirectional.
4-Wire/8-Wire Operation (M24SII-V07 high speed serial
module only: 4-wire or 8-wire.
Word size*: 7 or 8 bits.
Parity*: Even, odd or none.
Stop bits*: 1 or 2.
XON/XOFF*: Enabled or disabled individually for transmit
and receive in bidirectional mode.
Input Inactivity Timeout*: 0 to 200 seconds.
Port Logical Name*: Maximum 16 characters.
Port Select Mode*: Mode A = Port selection anytime while
printing; Mode B = Port selection at beginning of
printing.
Form Feed Mode*: No form feed; Form feed at beginning of
printing only; Form feed at end of printing only; Form
feed at both beginning and end of printing.
I.D. Page Enable: on or off.
Default Printer Assignment: Can be any module and port
number of a printer port.
* Option configurable per port. Users connected to any module
other than Module 1 may configure these options for their
module only.
Configurable Through Host Port Only:
Port Select Code: 1 to 8 ASCII characters.
Port Designation: Computer port or printer port.
Number of Printers (M24SII-V02 high speed parallel
module only): 0 to 4.
I.D. Page Message: Maximum 40 characters.
I.D. Page Message schedule: Beginning of printing or end of
printing.