HP 24SII User Manual
Page 91
/The following baud rates are supported for the two different printer
sharing modes:
Bidirectional: 300, 600, 1200, 2400, 4800, 9600, 19200,
38400, and 115.2k
Unidirectional: 9600, 115.2k, 230.4k, and 460.8k.
For example, to change the baud rate to 115.2K baud, send character
"2" (Set baud rate). The Model 24SII DES will respond with this menu
(when using bidirectional printer sharing mode):
1 for 300
2 for 600
3 for 1200
4 for 2400
5 for 4800
6 for 9600
7 for 19200
8 for 38400
9 for 115.2K
Enter Request :
Send "9" for 115.2K baud rate, and the Model 24SII DES will respond
with the reconfigured status of the port, the option menu, and the
prompt:
---------------------------------------------------
| Port | Baud | Word | Stop |Parity| Xon / Xoff |
| | Rate | Size | Bits | | Xmit | Recv |
---------------------------------------------------
| 2 | 115.2K| 8 | 1 |None | Off | Off |
--------------------------------------------------
Exit/Save......1 Set Stop Bits.....4
Set Baud Rate..2 Set Parity........5
Set Word Size..3 Set XON/XOFF......6
Enter Request :
You may now select other options from the menu to reconfigure Port
2. For example, to set XON/XOFF, send character "6" (Set
XON/XOFF) in response to the prompt.
NOTE: XON/XOFF flow control may be enabled in both the transmit
and receive directions for bidirectional printer sharing mode.
XON/XOFF may be enabled in the receive direction only for
unidirectional printer sharing mode.