2 slc family, 3 modules, 1 edit modules – Honeywell INTELLIKNIGHT 5820XL User Manual
Page 128: 1 naming modules, Slc family -2, Modules -2, 1 edit modules -2, 1 naming modules -2, Section 7.3.1.1), Red (see section 7.3.1.1)
IntelliKnight 5820XL Installation Manual
7-2
151209
7.2
SLC Family
The 5820XL supports SD protocol SLC devices or SK series SLC devices. You must
configure the 5820XL to accept the protocol of the devices you are installing. You
cannot mix SLC devices of different protocols.
1. Press
or
to display the main menu.
2. Enter the installer code if requested.
3. Select
for Program Menu.
4. Press
to enter module menu.
5. Press
to select the desired SLC device type.
6. Press
to accept the displayed SLC device type.
7.3
Modules
This section lists the options available under the module option in the program menu.
The following modules are available for the control panel: 5815XL SLC expander,
5860 remote fire alarm annunciator, 5824 serial/parallel printer interface module,
5496 intelligent power module, 5895XL intelligent power module, 5880 LED I/O
module, and 5865 LED annunciator.
7.3.1
Edit Modules
The features that can be edited when this option is selected are module name and
class of wiring (Class A or Class B), or features that are specific to the module to be
edited.
To edit an existing module:
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select
for Program Menu.
4. Press
to enter module menu.
5. Press
to edit a module.
6. Use the
or
arrow to select the module you wish to edit.
7.3.1.1 Naming Modules
You can assign an English name to a system hardware module to make it easier to
recognize on a display.
ENTER
ACK
ENTER
ACK
ENTER
ACK