Honeywell INTELLIKNIGHT 5820XL - Manual (Page 50)

IntelliKnight 5820XL Installation Manual
4-10 151209
4.5 Remote Annunciator 5860 Installation
The optional Model 5860 Remote Annunciator, shown in Figure 4-9, performs the
same functions as the on-board annunciator. Up to 8 annunciators can be added to
the IntelliKnight 5820XL system.
Figure 4-9 Model 5860 Remote Annunciator, Front View
5860 installation involves the following steps:
1. Make sure power is off at the panel.
2. Mount the 5860 in the desired location (see Section 4.5.1).
3. Connect the 5860 to the panel (see Section 4.5.2).
4. Use the on the back of the 5860 to assign an ID# to the 5860 (see Section 4.10.1).
5. The new 5860 module must be added to the system through programming. Jump-
Start will add the module automatically (see Section 6.1). You can also add it man-
ually (see Section 7.3.2). Select a name, if desired (see Section 7.3.1.1).