Honeywell INTELLIKNIGHT 5820XL - Manual (Page 131)

Programming
151209 7-5
7.4 Zone
Through the zone option in the program menu you can edit, add, delete, and view
zone points. Selections made here affect all detectors and switches in the zone. Up to
125 zones can be used in the system.
7.4.1 Edit Zone
Features that can be edited through the edit zone option are, edit zone name, zone
properties (which includes, zone type, and detector sensitivity), and zone output
mapping.
To edit a zone, follow these steps:
1. Enter the installer code.
2. Press or to display the main menu.
3. Select for Program Menu.
4. Press to enter zone menu.
5. Press to edit a zone.
6. Enter the zone number, then press .
7.4.1.1 Edit Zone Name
7. Press to edit the selected zone’s name.
A screen similar to the one shown in Figure 7-2 displays.
Figure 7-2 Selecting Character for Zone Name
8. Select the characters for the zone name by pressing the or arrow until the
desired character is shown then press .
OR
Enter the Numerical Designator for the character you want, then press . See
ENTER
ACK
ENTER
ACK