Honeywell INTELLIKNIGHT 5820XL - Manual (Page 163)

Programming
151209 7-37
7.7.3.2 System Alarm Cadence
Fire drill and system auxiliary alarm events can have special cadence patterns to
distinguish them from other types of alarms. See Section 7.4.1.4 for available
cadence patterns.
A typical use of the System Aux1 and Aux2 patterns is to distinguish fire emergencies
from other types of emergencies. The System Aux1 and Aux2 alarms would be
triggered by a system-wide switch.
To access the screen for selecting output groups and cadence patterns for system
trouble events:
1. Enter the installer code.
2. Press or to display the main menu.
3. Select for Program Menu.
4. From the Program Menu, select for System Options.
5. From the System Options Menu, select for Sys. Event Outputs.
6. Press for System Alarm Cadence.
A screen similar to the one in Figure 7-15 will display. Select a cadence pattern for
these special events if required for your application.
Figure 7-15 Special Cadence Patterns for Fire Drill and Auxiliary Alarm Events
ENTER
ACK