Honeywell INTELLIKNIGHT 5820XL - Manual (Page 168)

IntelliKnight 5820XL Installation Manual
7-42 151209
7.7.6.3 Daylight Saving Time Start and End
This option lets you to adjust the week and month Daylight Saving Time (DST) starts
and ends. For this feature to work, you must enable (set to Yes) the DST option under
Misc. Options 1 (see Section 7.7.6.3). You can view and change the settings in this
option anytime, however, settings will not take effect until 2007. The default values for
the DST Start and End options reflect the August 8, 2005 DST law that goes into
effect in 2007:
DST Start: The second Sunday in March
DST End: The first Sunday in November
To set the start and end for Daylight Saving Time:
11. Press the or arrow to select the week (1st, 2nd, etc.) Daylight Saving Time
starts, then press to make your selection and move to the month setting.
12. Press the or arrow to select the month (January – December) Daylight
Saving Time starts, then press to make your selection and move to the DST
End option.
13. Press the or arrow to select the week (1st, 2nd, etc.) Daylight Saving Time
ends, then press to make your selection and move to the month setting.
14. Press the or arrow to select the month (January – December) Daylight
Saving Time ends, then press two times to make your selection and exit
Misc. Options 3.
ENTER
ACK
ENTER
ACK
ENTER
ACK
ENTER
ACK