Reassenbly instructions, Attention when cf-w5l series is repaired, Assembly knowhow of the lcd – Matsushita CF-W5LWEZZ1 2 User Manual
Page 36: Assembly of the lcd front
36
9.3. Reassenbly instructions
9.3.1. Attention when CF-W5L series is repaired
- Please execute writing BIOS ID when you exchange the main board.
- Parts (sheet and rubber) etc.related various the conductive cloth and heat spreader cannot be recycled.Use
new parts.
9.3.2. Assembly knowhow of the LCD
9.3.2.1. Assembly of the LCD Front
LCD rubber
Affixation of LCD rubber / LCD BATT rubber / LCD BATT rubber
Paste side
Affixes between ribs
Put in the
length wall
LCD front
LCD front panel
LCD front Wan
Be parallel after Affixes
Width:Largeness
Width:Smallness
LCD side rubber
LCD rubber
Running aground do not be in a surrounding rib
LCD side rubber
Running aground do not be in a surrounding rib
The above drawing
The above drawing
Drawing in the under
Drawing in the under
The LCD rubber must not come in succession mutually.
Running aground do not be in a surrounding rib
The space among is 0.4-0.6mm.
LCD BATT rubber