Matsushita CF-W5LWEZZ1 2 - Manual (Page 67)

67
DFKE0817ZA : There is painting
DFKE0817YA : There is no painting
Disk angle MG
Wall root application
Wall root application
Disk angle sheet B
Disk angle
sheet B
Disk angle sheet C
Disk angle
sheet C
Do not run aground in the rib.
A-A
Cross section
Disk angle sheet A
Disk angle sheet A
Disk angle MG
Fingernail insertion
Disk angle FPC cover
Disk angle FPC cover
externals match
Disk angle cushion
Screw
DXQT2+D25FNL
PET tape
From externals
From externals
to not protruding
Disk angle cushion
Disk angle cushion
Sheet metal corner match
(note)
It is confirmed that the point of the machine
screw on an opposite side does not protrude
beyond the angle after tightening the machine
screw.
Externals match Externals match Externals match Concave part Concave part Concave part
Wall application
Wall application Wall application Wall application
Corner hole corner match
Round hole central distribution