Matsushita CF-W5LWEZZ1 2 - Manual (Page 62)

62
Disk knob spring
Disk cover lock assy
Inserts in the slide boss Inserts in the slide boss
The spring is hooked
Safety work
Safety work
Safety work
Solenoid
Processes between ribs
Inserts under the rib
Solenoid is made on
disk knob spring
When installing and expanding because handles
or transforming, it is not possible to recycle.
The spring is hooked after
whether disk cover lock assy
operates smoothly is confirmed.
Thing that running
aground is not in rib
It is done up that there is
no machine screw hole
Solenoid cable
Disk eject
knob assy
Valley bend
SW module flexible cable
SW module
Connection
On terminal side
It is confirmed that the SW lever has been
surely inserted in the ditch of the knob.
Management size : 0 1mm
Substrate externals suiting
Management size : 0 1mm
PWB right adjust fixation
Safety work
Safety work
Safety work
PET tape
To avoid gate ( ),
the line is processed
It is a box shape externals putting together and a valley bend
Bends from externals to the inside of 0-2mm
After concluding screw
It is confirmed to move smoothly.
Inserts in PIN
PIN central suiting
9.3.
4.5. Assembly of the SW Board