Matsushita CF-W5LWEZZ1 2 - Manual (Page 74)

74
9.3.6.3. Assembly of the Top Case
Gasket
cloth
DVD heat inslation sheet
Puts it on the drive bottom.
Puts it on the drive side.
Range which you may grip
The connector is connected.
The center of Pin is a standard.
Surely pressurizes
between Pin and
Pin.
Preparation Specification
DVD drive
DVD drive
Pressurizes tape at the time of the tape
pressurizing with the drive damper suppressed.
(When suppressing, with tools)
The pick stopper is removed before the drive
damper is pressurized.
The removed pick stopper is annulled.
Arranges it under Cable. Arranges it under Board.
Distributes at
the center.
Connector externals match
The damper (3 places) must not float after
affixing the tape.
Suppress the part FFC again when floating.
PET tape
9.3.6.4. Setting Disk Cover