Matsushita CF-W5LWEZZ1 2 - Manual (Page 84)

84
9.3.6.15. Putting Tapes for WWAN Antenna Cable
9.3.6.16. Assembly of the LCD Rear
LCD LEG rubber
Screw (DFHE5025XA)
HDD cover
Affixes to the concave part.
Tightens while suppressing the cover.
The model of no module installation
Line hold sheet
Screw (DFHE5025XA)
The Antenna cable connector is processed
to the part of board’s square frame.
A
B
LCD unit
Antenna cover
Screw (DXHM0057ZA)
SIMM cover is opened and the screw is tightened.
After the hook in the point part is
inserted (A), the opposite side is
pushed in (B).
It is confirmed that the both ends of
antenna cover and the center of
antenna cover are convex does not
over 0.3mm.
Safety Work