Matsushita CF-W5LWEZZ1 2 - Manual (Page 44)

44
9.3.2.11. Putting LCD Rear Cushions
9.3.2.12. Assembly of the WM Cable
LCD rear cushion LCD rear cushion
LCD rear spacer
LCD rear spacer
Rear difference part match
Rear difference part
LCD rear WAN
Spacer is matched
to the wall and affixes.
Affixation to the slope part
is affixed along shape.
Affixation to the slope part
is affixed along shape.
Spacer is matched
to the wall and affixes.
WM cable
Conductive cloth is wrapped.
The two sided tape put when goods is delivered is peeled off.
Abandonment processing
A-ACross section
Overlap affixation of about 5mm
Overlap affixation of about 5mm
Black seat edge standard Black seat edge standard
Finished
chart
Finished
chart
Conductive cloth
conductive cloth
Conductive cloth
from conductive cloth
from conductive cloth
Filn Impedor is wrapped
Cover Filn Impedor completely
Pet tape is wrapped.
A two sided tape is affixed
to the connector flat side
Connector flat side
Film impedor
PET tape
Two sided tape
Safety Work