Matsushita CF-W5LWEZZ1 2 - Manual (Page 64)

64
9.3.4.8. Putting Hinge Buckup Sheet and LCD Knob Sheet etc.
9.3.
4.9. Assembly of the LCD Knob
LCD knob sheet
Boss root application
Corner hole externals
match
Boss externals match
Concave part edge match
Hinge backup sheet
Refer to next
page
From the point 0 1mm
BATT cushion
Affixation within the range between ribs
Thing without running aground to rib
Screw
Disk knob spring
LCD knob
Surface
Back
The seat under the knob point
must confirm no anger.
Whether the knob operates smoothly
after installing the spring is confirmed.
The fingernail is hooked
The slide is done and inserts The spring is hooked.