Matsushita CF-W5LWEZZ1 2 - Manual (Page 78)

78
9.3.6.8. Assembly of the Heat Spreader
9.3.6.9. Setting Keyboard
The flaking off papersa (6 places A to F) of a two sided tape are peeled off.
Heat spleader
Heat radiation grease
Spread with a tool.
Over sheet is pasted
on an opposite side.
Over sheet is pasted
on an opposite side.
PET
tape
Safety Work
Safety Work
There is a possibility to damage sheet and cable
when the part where aluminum is thin bends.
Returns it if bending. However, use not bare-
handed but the tool (pliers etc).
Attention
Installs it in Top case’s dent part.
Does not run aground on the
keyboard installation side.
Pressure is pressurized by
or more.
It is confirmed that edge part where on
keyboard FFC is surely covered with the
PET tape.
Arrangement
standard