Matsushita CF-W5LWEZZ1 2 User Manual
Page 56
56
9.3.3.13. Assembly of the W-LAN Sheet
9.3.3.14. Assembly of the HDD FPC
SW cable sheet
Vertical direction
< Preparation of WLAN sheet >
WLAN sheet
WLAN sheet
(note)
The flaking off paper of a both
sided tape is peeled off and affixes.
Sheet is lightly held by the finger and the fold
habit is applied.
When suppressing, the fold habit is applied so
as not to overflow the box sheet metal externals.
Chip bottom match on board
Horizontal direction
Silk line match on board
Runs side
by side.
The cutting lack part is
inserted, and puts into
the state of the roll.
Horizontal direction is a
suiting sheet copper part
externals.
Vertical direction is a
suiting transparent sheet
part externals.
DC IN cable
The line is drawn out between the coil and
the connector, and the main line is prevented
from running aground in the coil and the connector.
Safety work
Connection
CPU cushion
Silk is made a
sign and affixes