Matsushita CF-W5LWEZZ1 2 - Manual (Page 42)

42
9.3.2.9. Line processing LCD Cable
The cable is processed to the LCD frame clamping
PET tape
m
Safety Work
The built-in order
The built-in order
The built-in order
Connector connection
A blue, white line is prevented
from lying on top of one another
Peel off the LCD sheet
Overlaps on the connector and affixes
A red line of the cable is matched
to the LCD frame externals
Connector and conductive cloth wrapping part,
it affixation is surely kicked.
(The cable side is picked up and affixed)
After LCD sheet is turned over and conductive
cloth is put, a both sided tape is put.
Conductive cloth
All the signal lines are
processed the conductive cloth internally.
Insulation sheet edge match
Connector
Externals edge match
PET tape
PET tape is processed in
parallel to the conductive cloth.
The cable is prevented being processed
on damper.
The room not done to the state is given.
PET tape is put with along
LCD of the cable.
Safety Work
Safety Work